Steel Roof Truss Manufacturer for Export from Malaysia: C-Section and Batten Supply
Powin Steel Industries Sdn Bhd manufactures C-section truss members and steel roof battens in Melaka, Malaysia, for domestic projects and overseas supply enquiries. We have completed truss export orders and welcome enquiries from international contractors, developers, roof system designers and distributors.
Our published range covers identifiable lightweight steel roof framing components, including C-Section 135, C-Section 153, Batten 110 and Batten 121. These are supplied components rather than an automatically included, fully engineered and assembled roof truss system.
Before proceeding, we work with buyers to clarify the specified profiles, quantities, related accessories, available product support and commercial handover requirements.
Enquire About Export Supply →
Which Steel Roof Truss Components Can We Supply from Malaysia?
We manufacture C-section truss members and steel battens for use within appropriately designed lightweight steel roof framing systems. Our current C-section truss and batten range identifies the available profile families and their published material specifications.
By referring to named profiles, overseas buyers can prepare enquiries around actual manufactured components rather than the broad description "steel truss", which can refer to very different supply arrangements.
C-Section Truss
Our C-section members are intended for designated roles within the roof-framing arrangement established by the project design. We manufacture C-Section 135 and C-Section 153, allowing buyers to identify the required profile when discussing their material schedule.
- Profiles C-Section 135 / 153
- Steel thickness 0.75–1.0 mm
- Aluzinc coating AZ70 / AZ150
- Standard length 6 m
The correct member profile, thickness and arrangement must be selected against the roof's approved design requirements. A listed thickness alone does not establish the allowable span or structural capacity.
Steel Roof Batten
Our steel battens provide a support and fixing interface for roof coverings within a properly designed framing arrangement. The published range includes Batten 110 and Batten 121.
Batten spacing, fixing methods and compatibility with the selected roof covering must be determined from the project specifications and relevant installation details.
- Profiles Batten 110 / 121
- Steel thickness 0.45–0.50 mm
- Aluzinc coating AZ70 / AZ150
- Standard length 6 m
Buyers can reference these profiles when coordinating their roof-covering support requirements with the responsible designer.
Is a C-Section and Batten Order the Same as an Engineered Truss System?
No. A C-section and batten order supplies specified roof-framing components. A complete engineered roof truss system also requires a coordinated structural design, member arrangement, connection details, bracing, anchors and installation instructions. These additional elements must be defined and allocated to the appropriate parties.
Project Roof Design
The responsible designer establishes loads, geometry, member requirements, supports, connections and compliance obligations.
Specified Component Supply
The agreed order identifies the C-section members, battens, quantities, lengths and any expressly included related items.
On-Site Assembly and Installation
The appointed installation party carries out the work in accordance with the approved design and applicable site requirements.
What Must Be Explicitly Agreed?
The quotation and related documentation should make clear whether the buyer is ordering loose standard-length members, specially prepared components or another defined supply arrangement.
The project team should also establish:
- Who is responsible for structural calculations, approved drawings and roof-frame design.
- Whether any project-specific cutting, connection preparation or component identification is required and available.
- Which G.I. L brackets, screws, wall plugs, sleeve anchors or other related items are expressly included.
- Who is responsible for bracing, connection design, anchoring and installation instructions.
- Where our component supply responsibility ends and the next party's responsibility begins.
Our product pages display associated accessories, but displaying an accessory does not mean that it is automatically included with every truss or batten order.
Define the System Before Confirming the Supply.
An identifiable steel profile is one component of the roof structure. Its safe and suitable application depends on the approved arrangement, relevant connections and the project's installation requirements.
We can discuss our manufactured products against the supplied drawings and specifications, while project engineering and destination approval remain the responsibility of the appropriately appointed parties.
How Do We Discuss the Right Profile for a Project?
The project's roof design must establish the role and required specification of each C-section member or batten before a purchasing decision is made.
We use the specified requirements to discuss which of our published product options may be relevant to the enquiry. This gives buyers a practical starting point for confirming the actual items needed instead of relying on a general description of the roof structure.
Important Selection Considerations
- Member function: Whether the component is intended for a designated truss-member role or roof-covering support.
- Profile geometry: Required dimensions, shape and compatibility with the approved details.
- Material thickness: The specified thickness and how thickness is defined in the relevant product documentation.
- Coating specification: The required Aluzinc coating designation and suitability for the project's exposure conditions.
- Lengths and quantities: Standard lengths, cutting requirements and the approved member schedule.
- Structural interface: Design loads, support conditions, connection details and roof-covering fixing requirements.
We offer drawing and specification support, together with project guidance on request. This can help buyers clarify manufactured component options before placing an order.
What Should Buyers Compare Between Steel Roof Truss Supply Offers?
Compare the actual supplied products, specifications, documentation and contractual responsibilities—not just the headline price or description of a steel roof truss.
Two offers may use similar wording while covering different materials, accessories, design obligations or commercial handover arrangements. The following comparison points help international purchasing teams evaluate the scope consistently.
| Comparison Area | What Buyers Should Check | Our Component Supply Position |
|---|---|---|
| Supply form | Loose members, cut components, prepared assemblies or a complete engineered truss package. | Our published offering identifies C-section truss members and battens. Any additional preparation or scope requires specific agreement. |
| Named profiles | Exact product references and required section geometry. | C-Section 135, C-Section 153, Batten 110 and Batten 121. |
| Steel thickness | Nominal thickness, measurement basis and specified tolerances where applicable. | Published C-section range: 0.75–1.0 mm. Published batten range: 0.45–0.50 mm. |
| Coating | Coating designation, corrosion environment and any required supporting material evidence. | Published Aluzinc options: AZ70 and AZ150. Confirm the selected variant for the order. |
| Lengths and quantities | Standard or special lengths, quantities per profile and any cutting or identification needs. | Published standard length: 6 m. Other requirements are subject to enquiry and confirmation. |
| Connectors and fasteners | Brackets, screws, anchors, connection components and their individual quantities. | Related accessories are displayed in our product information. Only expressly agreed items form part of an order. |
| Drawings and evidence | Profile drawings, approved project documentation, material records and any destination-specific requirements. | Published product drawings and specification information are available for review. Additional documentation must be discussed for the project. |
| Handover boundary | Packing requirements, collection or delivery point, freight responsibility, import obligations and receiving arrangements. | Commercial handover and export responsibilities are determined for each confirmed order rather than assumed. |
What Product Evidence Can Overseas Teams Review?
Overseas designers, contractors and procurement teams can review our published component drawings and product specifications before discussing project-specific documentation.
Our individual C-Section Truss and Batten pages identify the respective profile options, steel thickness ranges, Aluzinc coating choices and standard lengths.
The drawings help readers understand the form of the manufactured profiles before matching them with the approved member requirements.
Material Specifications and Warranty Conditions
The product information includes conditional material perforation-warranty wording of up to 50 years, subject to selected material specifications and applicable terms and conditions.
This does not establish that every product variant, environment or export order receives the same warranty coverage. Buyers should confirm the terms applicable to their selected material and intended use before relying on any warranty.
Similarly, a Malaysian product listing does not automatically demonstrate compliance with another country's structural regulations or approval requirements. Any required design verification, testing evidence or destination-specific acceptance must be established separately.
Match the Evidence to the Ordered Variant
The selected profile, thickness, coating designation and intended application should be consistent across the member schedule, product specifications and confirmed quotation.
If the project requires particular documents, material evidence, testing or formal approvals, identify those requirements before the order is finalised.
How Is the Export Order Boundary Agreed?
We have completed truss export orders and welcome new overseas enquiries. The exact export supply arrangement must be agreed for each project, including the destination, material scope, accessories, packing requirements, freight arrangements and commercial handover.
Our Melaka manufacturing base provides a direct starting point for buyers sourcing Malaysian steel roof-framing components. Export enquiries are assessed against the required products and the agreed supply responsibilities.
- Confirm the Destination and Project Requirements Identify the destination country, the approved roof-frame documentation and any local material or compliance requirements that apply to the intended use.
- Agree the Component and Accessory Scope Specify the named profiles, material options, lengths, quantities and any requested brackets, fasteners or other related items.
- Establish Packing and Commercial Handover Discuss the necessary packing method, handover location, freight responsibilities, commercial terms and party responsible for import arrangements.
- Allocate Design and Installation Responsibilities Confirm the local project designer, site installation contractor and parties responsible for structural approval and installation.
We can assist with coordinating installation arrangements when specifically requested and agreed. We do not perform installation work ourselves, and overseas installation is not part of our standard published component offering.
One Confirmed Scope, Clearer Purchasing Decisions
Export transactions involve more than the selection of steel profiles. The order should distinguish manufacturing supply from transport, import clearance, local design approval and on-site work.
No destination country, freight service, delivery term, minimum quantity or lead time should be assumed without order-specific confirmation.
This helps distributors and project purchasers understand the responsibilities they must arrange independently.
Frequently Asked Questions About Steel Roof Truss Exports
Does Powin Steel accept steel roof truss export enquiries?
Yes. We manufacture C-section truss members and battens in Melaka, have completed truss export orders and welcome new international supply enquiries. The product scope and export arrangement are confirmed individually for each order.
Can we purchase C-section truss members and battens separately?
Our published range identifies C-section truss members and steel battens as individual product categories. Buyers can enquire about the required profiles and quantities, with availability and the final order scope subject to confirmation.
Does an order include brackets, screws and anchors?
Not automatically. Our product pages display related G.I. L brackets, screws and wall plugs or sleeve anchors, but inclusion depends on the confirmed quotation. Buyers should identify the required accessory types and quantities separately.
Are the C-section and batten products automatically approved for overseas construction?
No. Product specifications from Malaysia do not automatically establish compliance with the destination country's building requirements. The responsible designer and relevant local parties must confirm suitability and any required approvals.
Can Powin Steel help with drawings and installation arrangements?
We offer drawing and specification support, product guidance and assistance coordinating installation arrangements on request. Such support does not replace the responsibilities of the appointed structural designer or installation contractor. We do not carry out installation ourselves.
Enquire About C-Section Truss and Batten Supply from Malaysia
In summary, Powin Steel Industries Sdn Bhd manufactures C-section truss members and steel roof battens in Melaka for domestic and international supply enquiries. Our published range provides identifiable lightweight roof-framing components, while the complete structural design and commercial supply boundaries must be agreed for each project.
To discuss an export order, please provide the destination and, where available, the approved roof-frame drawing or member schedule. Include your required C-section and batten profiles, thickness, coating, quantities and requested handover arrangement.
- Destination country and project details
- Approved roof-frame drawing or member schedule
- Specified profiles, coating and quantities
- Required accessories and commercial handover
You can also attach a project drawing or material schedule through our contact enquiry form.
